HiBot develops low-cost and extremely compact motor drives and other components for control of motors and automation. The development of components for robotics and automation is based on the technology and know-how acquired at Hirose-Fukushima Laboratory of Tokyo Institute of Technology. Our products list ranges from low-cost boards for educational products to components optimized for robotics control. Therefore, whether you are looking for low-cost components for educational robotics contests, boards for research, or professional components for control of field robots, you can count on HiBot.

When ordering, please select the number of components of the desired product, complete your information (name, e-mail, phone number, etc.) in the bottom of this page, and press the "Send Order" button. You will receive the the bill, delivery estimation and description of methods of payment.

For orders from overseas, please see here．


What are your needs and/or applications?
The right solution for your application can be obtained with a combination of our components listed below. Besides if you can't find it, we might be able to provide you with the right custom made components.

Please have a look at the FAQ section in the bottom of this page or contact us for an estimation and an idea for a possible hardware solution to match your needs!

To have an idea of the type of applications you can make with our components, please have a look at the section Robots where we show some of our latest developments for some of our customers.

Product list
specmanual Based on SH2 Hitachi microprocessor, this robot controller is easy and fast to use. Ideal for developing new robots or upgrading existing ones. Due to its extremelly compact dimensions (25mm x 50mm), it can be easily embedded in mobile robots or other components.
Standard PriceJPY 15,750(tax incl.)
Academic PriceJPY 12,600(tax incl.)
Quote:
In its reduced dimensions (25mm x 50mm) it emanates the power to control powerful motors (using three modules also Brushless Motors) up to 60V and 15A. Controlled in PWM, it can be utilized with HiBot's controllers. COMING VERY SOON
Standard Pricecontact us
Quote:
specmanual An extremely compact microcontroller board (20mm x 40mm) equipped with two H-bridge integrated circuits, providing up to 3A each. Ideal for driving small DC motors where space is limited.
Standard PriceJPY 31,500(tax incl.)
Academic PriceJPY 26,250(tax incl.)
Quote:
specmanual A compact yet powerful motor drive. Its reduced dimensions (25mm x 50mm) make it an ideal choice for mobile robots, where space is often limited. Controlled in PWM, it can be utilized with HiBot's SH2 Tiny controller.
Standard PriceJPY 12,600(tax incl.)
Academic PriceJPY 7,875(tax incl.)
Quote:
Compact (25mm x 50mm) component board that automatically controls the recharge of Li-Ion, NiMH and NiCd batteries. Several other options are available on board. COMING VERY SOON.
Standard Pricecontact us
Quote:
specmanual Three high-power H-bridge integrated circuits in a very compact assembly (25mm x 50mm). When connected to the TITech SH2 Tiny, it can drive three motors independently with up to 5A each, or one brushless motor.
Standard PriceJPY 28,350(tax incl.)
Academic PriceJPY 22,050(tax incl.)
Quote:
specSALE! Compact inertia sensor unit (25x50mm). Measures rotation in three axes, acceleration in three directions, and magnetic field in three dimensions (compass). Sold together with one TITech SH2 Tiny Controller+Firmware(source code) and cables.
Standard PriceJPY 45,150(tax incl.)
Academic PriceJPY 45,150(tax incl.)
Quote:
specmanual Based on SH2 Hitachi microprocessor, this compact board allows the user to explore all the potentials of the microprocessor in a fast and easy way. Ideal for developing new robots (it can be used with the servo drives available in our product list) or upgrading existing ones.
Standard PriceJPY 60,900(tax incl.)
Academic PriceJPY 50,400(tax incl.)
Quote:
specmanual SALE! This motor drive can control 4 output channels with up to 5A each. The pre-installed firmware among other features allows the user to set the motor in speed, postion or direct control modes; all PID parameters can be set by serial communication.(40% off)
Standard PriceJPY 48,825(tax incl.)
Academic PriceJPY 39,060(tax incl.)
Quote:
spec A powerful motor drive for brush and brushless DC motors. Each channel can drive up to 50A. The pre-installed firmware allows position, velocity, torque and direct control.
Standard Pricecontact us
Quote:
specmanual An interface board equipped with mini-USB and serial connectors. Ideal for connecting other motor drives or robot controllers to a notebook for programming or debugging.
Standard PriceJPY 10,500(tax incl.)
Academic PriceJPY 8,400(tax incl.)
Quote:
specmanual This motor drive employs the same high-power H-bridge integrated circuit of the 4-Axes DC Servo, connected to a circuit for proportional control. It can be used for simple position control by connecting it to a potentiometer.
Standard PriceJPY 10,500(tax incl.)
Academic PriceJPY 8,400(tax incl.)
Quote:
specmanual Equipped with Lantronix wireless LAN device server WiPort , it is an interface board for conversion between wireless LAN and serial protocols. Since it contains also a level converter, it can be used not only with HiBot`s products, but with a wide range of devices.
Standard PriceJPY 31,290(tax incl.)
Academic PriceJPY 25,032(tax incl.)
Quote:
An extremely compact power side line switch board (25mm x 30mm), it allows the control a DC power line for more than 50V and 30A with a small control input signal (from a minimum of 3.3V) .
Standard Pricecontact us
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: PHR-2 (JST connector) Colors: 1-Red 2-Black
Standard PriceJPY 126(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: SHR-02V-S-B (JST connector) Colors: 1-Red 2-Black
Standard PriceJPY 158(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: SHR-03V-S-B (JST connector) Colors: 1-Gray 2-White 3-Black
Standard PriceJPY 189(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: SHR-05V-S-B (JST connector) Colors: 1-Blue 2-Purple 3-Gray 4-White 5-Black
Standard PriceJPY 284(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: SHR-06V-S-B (JST connector) Colors: 1-Green 2-Blue 3-Purple 4-Gray 5-White 6-Black
Standard PriceJPY 315(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. The end is without connector. Housing: SHR-06V-S-B (JST connector), 51021-0600 (Molex) Colors: 1-Blue 2-Gray 3-Gray 4-Gray 5-Gray 6-Gray
Standard PriceJPY 420(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. Housing:SHR-10V-S-B (JST Connector) Colors: 1-Brown 2-Red 3-Orange 4-Yellow 5-Green 6-Blue 7-Violet 8-Gray 9-White 10-Black
Standard PriceJPY 473(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. Housing:SHR-12V-S-B (JST Connector) Colors: 1-White 2-Black 3-Brown 4-Red 5-Orange 6-Yellow 7-Green 8-Blue 9-Purple 10-Gray 11-White 12-Black
Standard PriceJPY 536(tax incl.)
Quote:
A cable with connectors for use with HiBot's products. Length: 30cm. Housing:SHR-14V-S-B (JST Connector) Colors: 1-Purple 2-Gray 3-White 4-Black 5-Brown 6-Red 7-Orange 8-Yellow 9-Green 10-Blue 11-Purple 12-Gray 13-White 14-Black
Standard PriceJPY 599(tax incl.)
Quote:
When oerdering cables Please note that cables cannot be ordered separately. Cables can only be ordered with other components.
Name
e-mail address
Phone number
Shipping address
Institution / Company

About ordering (for overseas)
Upon filling the form with product name(s), quantity, the name of your company or institution, shipping address, contact information (phone，fax，e-mail)( ALL FIELDS REQUIRED), we will reply to you providing the estimation for the price and delivery time. Please be noted that shipping costs and insurance fee will be also charged separately.
Information about mail orders
Seller HiBot Corp.
(President: Paulo Debenest (Ph.D.(Eng.)), Naho Kitano )
Address Daichi Hanatani Building #801, Shimomeguro 2-18-3, Meguro-ku 153-0064, Tokyo, Japan
TEL
FAX		 +81-3-6420-0445
+81-3-6420-0446
e-mail
Validity of estimation Written on quotation sheet
Payment In advance by bank transfer, or upon delivery (please contact us)
Shipping fee Please refer to the fee applied by UPS, DHL, etc
Delivery time Products are sent on Thursday, in case of lack of stock of the requested products customers will be promptly contacted for an estimation of the delivery time.
Additional costs Transfer fee, delivery fee (please contact us)
Products with defects Products delivered with defects will be replaced
Return of products Products with defects can be returned withing 1 week of delivery (Please contact us as soon as possible).
FAQ

How do I drive and control a brushless motor?
Using one SH2 Tiny Controller and one 3 Axes Power Module you can easily drive one brushless motor. This solution can allow you to drive up to TWO brushless motors with using hallsensors, encoders and potentiometers as feedbacks for your controller.
In case you need more power than 28V and 5A you can always make use of three 10A Power modules instead of one 3Axes Power Module.



How do I connect a few microcontrollers together?

Our components can be connected by using the CAN ports and making use of the CAN Open protocol (Please contact us for more details), also serial communication can be achieved using the TTL or RS232 level ports available on board.


How do I connect my computer to the components?

By using our WirelessSerial converter board user can connect by WiFi to the robot.
Eventually also the SerialDownloading board can be utilized to connect the computer to the robot by serial or USB port.


I do not have space for hardware, how can I drive two small DC motors?

The Mini2Axes board is the right solution for this. Two motor amplifier are installed onboard and they can be controlled with the power of the SH2 micro processor with using Analog inputs and/or encoders


What kind of signal do I have to generate for using HiBot motor power modules?

All components needs PWM signal input which can be generated by the SH2 Tiny Controller, the SH2 Controller or the Mini2Axes boards. However the Titech Driver ver.5 can accept in input also an anlog signal 0-5v and besides the board can generate an on board position and direct control without the need of a microcontroller.


What if I don't have the resources and time for programming?

A set of the 4AxesDC servo, the TitechDriver ver.1 or TitechDriver ver.5 can be one solution with their preinstalled firmware and onboard analog control. HiBot provides also custom made software firmware service for our customer needs so please contact us. You might also want to visit also the Dowbload/Link section where we provide sample codes that can help the user getting into the programming phase.


Where do I find wires and connectors for my application?

User can purchase cable sets (on one edge wires are already placed inside their housing) for our components directly from our website. However as we furnish the connector and contact codes, user can purchase them directly to the maker or trough online website. Please contact us on this and we will provide with more details where to find them.